What is RSM3/1-F full-width weft warp knitting machine

Update:10-06-2019
Summary:

RSM3/1-F full-width weft warp knitting machine. This ma […]

RSM3/1-F full-width weft warp knitting machine. This machine mainly produces warp knitted biaxial fabrics. Compared with the traditional stitch-wound full-width weft, the warp-knit biaxial fabric is suitable for the composite fabric for wind power generation blades due to warp knitting, faster speed and better surface flatness.

This machine mainly produces warp knitted biaxial fabrics. Compared with the traditional stitch-wound full-width weft, the warp-knit biaxial fabric is suitable for the composite fabric for wind power generation blades due to warp knitting, faster speed and better surface flatness.
Working width: 2600, 2800, 3050.3300
Speed: 50-700r/min
Machine number: 3.5, 5, 7, 9
Stitch length: 0.5~6.5mm
Let-off agency: passive pass-through
Feeding method: passive feeding in the middle
Feeding allowable maximum diameter: ∮1000mm
The maximum diameter allowed for the roll: ∮800mm
Warp frame: 7 sets
Weft creel: 1 set
Suction device: 2 sets
Short cutting machine: 1 set
Coiling device: electronic crimping
Needle type: slot needle
Warp beam: 21′′, 30′′ universal
Parting method: threading board
Traverse mode: cam
Number of combs: 1
Open the knife: 7
Lining: 1
Stitch: 1-5.5mm
Main drive of the machine: inverter control
Machine Control: 5.7-inch touch screen control
Warp yarn mechanism: servo motor control
Weft insertion system: parallel weft lining servo-controlled lateral movement system determines the traverse range according to the weft requirements
Total power: 5.5kw

https://www.automaticrbm.com/