Everyone knows that warping machines are used for warpi […]
Everyone knows that warping machines are used for warping. But know that they are mainly divided into two categories: batch warping and strip warping?
Among them, the batch warping machine can be divided into the traditional drum type friction transmission warping machine and the new warping machine which is directly driven by the warping shaft.
The pressing method of the drum type friction transmission warping machine relies on the weight of the weight hammer, the warp beam arm and the weight of the warp beam itself, and the horizontal pressure method is adopted after the old machine is modified.
Roller type friction transmission warping machine
The new high-speed warping machine is a warp yarn drawn from the bobbin on the bobbin. It passes through the gap between the gripper and the column and passes through the broken head detector. It passes through the guide plate and then passes through the guide rod. After winding the length measuring roller, it is wound onto the warp beam. The warp beam can be directly dragged by the variable speed motor. When the winding diameter is increased, the tachogenerator connected to the length measuring roller emits a signal of speed change, and the electric motor automatically reduces the rotation speed of the motor to keep the warp winding wire speed constant.
New high speed warping machine
The working principle of the slitting warping machine is that after the yarn is taken out from the bobbin on the creel, the guide rod, the rear cymbal, the guide rod, the photoelectric break end self-stopping piece, the split twisting, the fixed width, the length measuring roller and the guide The rolls are wound one by one onto the drum. When the shaft is inverted, all the warp yarns on the drum are withdrawn by the two-dot chain line in the counterclockwise direction as the shaft is rotated, and then wound onto the weaving shaft.