Multi-comb warp knitting machines can be divided into t […]
Multi-comb warp knitting machines can be divided into the following categories according to their structural features, uses and additional devices:
1.Weft-type multi-comb warp knitting machine
This type of machine generally uses the front 2-3 bar to form a mesh bottom fabric, and the rear weft insertion comb generally uses 2, 4 and 6 to form a traverse line. The pattern is formed by the flower comb of the weft insertion, so the pattern effect is relatively flat. The main models are mechanically controlled MRES33EH, MRES39EH and electronically controlled MRES33 SU, MRES43SU. This type of machine mainly produces strip lace, full mesh fabric and mesh curtains.
2.Loop type multi-comb warp knitting machine
The loop-shaped multi-card warp knitting machine is put on the front of the ground comb and made into a loop weaving, and the long stretched yarn is used to form a fabric having a steric effect. Typical models are MRE29/24SU and MRE32/24SU. All combs are controlled by the SU electronic bar traverse mechanism, which can reach E28. Because the machine is combed into a loop motion, the use of the flower comb yarn is limited, and there is no such thing as a multi-comb machine with a pressure plate. However, such equipment in Guangdong is also introduced.
3.Yarn type multi-comb warp knitting machine
This type of machine has both mechanically controlled MRGSF 31/16 EH and electronically controlled MRGSF31/16SU. The flower combs are divided into two types, one of which is placed in front of the platen to form a steric effect. The other type is placed behind the ground comb for the weft insertion movement, which mainly forms a flat pattern to set off the main pattern.