The RSJ4/2 model is a less combed Jacquard warp machine

Update:03-06-2019
Summary:

The RSJ4/2 model is a less combed Jacquard warp knittin […]

The RSJ4/2 model is a less combed Jacquard warp knitting machine. Before the machine, the Jacquard comb is only traversed and does not swing. The platen is moved up and down, and the comb is traversed and oscillated. This machine is mainly used to produce mesh curtains, tablecloths, clothing mesh and scarves.
1.The Jacquard system makes the organization flexible and variable, increasing the range of patterns;
2.Before the machine, the Jacquard comb is applied by the pressing plate after the yarn is placed in the front of the needle to form the pattern of the embossing effect, and the pattern is formed by the weft comb after the machine, and the combination of the two makes the pattern effect strengthened;
3.Both the ground comb and the Jaccha comb are EBA electronically delivered;
4.The electronic pulling mechanism replaces the cumbersome gear mechanism, and only the fabric density is set, and the pulling mechanism speed is automatically adjusted;
5.The whole structure of the machine adopts the six-ancespan pan head, and has two escalators and one aisle, which fully considers the convenience of operation.
Technical Parameters:
Machine number: E24
Speed: 20-500rpm
Working width: 3403mm (134′′)
Number of combs: 1 comb, 1 spandex comb, 2 separate Jacquard combs, 1 press yarn
Needle type: compound needle
Warp beam: ∮21′′×21′′
Spandex comb, Jacquard comb traverse mode: cam traverse
Ground comb, Jacquard comb traverse mode: disk cam
Delivery method: 4 EBA electronic delivery (control combing, spandex, Jaka one support 2)
Pulling method: electronic pulling
Curling method: electronic curling
Transmission mode: motor
Side yarn small pan: 2
Pan head: ∮ 30"
Escalator: 1
Main motor power: 5.5KW
Application areas:This machine is mainly used to produce mesh curtains, tablecloths, clothing mesh and scarves.

https://www.automaticrbm.com/