Among the many Raschel machines, the elastic raschel wa […]
Among the many Raschel machines, the elastic raschel warp knitting machine is the most successful in the international market. The elastic raschel warp knitting machine uses a short- or medium-motion composite needle, the number of combs is generally 4, and the machine speed is generally 2000-2500 rpm. According to the movement of the knitting needles, it can be divided into two types: high-speed elastic raschel warp knitting machine (short-motion) and general-purpose elastic raschel warp knitting machine (medium movement).
High-speed elastic raschel warp knitting machines mainly include RSE 4N-1, RSE 4N-2, RSE 4N-3 and RSE4-1. The general-purpose elastic raschel warp knitting machine has RSE 4N-3K, RS (E) 4N-4, RS (E) 4. This type of machine has been introduced in China, and there are about 300 used equipment imported from abroad. It is also one of the machines introduced in recent years.
The RSE4-1 is a fourth-generation elastic raschel warp knitting machine with a very good market worldwide. It is mostly used to produce elastic fabrics and can also be used to produce non-elastic fabrics. The machine has greatly improved machine performance through a number of improvements and the use of new materials. For example, hollow combs are used and made of new materials. The patented needle bed and needle core independent control system is used to control the working temperature of the machine, thus ensuring the accuracy of the weaving machine parts. The side walls and racks use a solid structure.
In addition, after researching the rack and traverse mechanism, the most advanced analysis program is used to adapt to the high speed requirements, and the speed can reach 2500 rpm. In order to meet the increasing demand for elastic fabrics, the scope of the RSE4-1 elastic raschel warp knitting machine has been further expanded. The machine number of the new machine can be increased to E44, and the working width can be as high as 190 inches (4826mm). High quality women's underwear fabric. When using machine number E28 and machine width 190′′ (483cm), conventional products can be produced at a maximum speed of 2200rpm. The biggest advantage of this width is that it can meet the requirements of some underwear manufacturers using 2m wide cutting table. It can reduce the cutting loss. In addition, the wide width can be used for the production of multiple fabrics, up to 3 pieces, which are determined according to the shrinkage of the fabric.