A jet loom that can run without air


First of all, shuttle looms and shuttle looms. After ma […]

First of all, shuttle looms and shuttle looms. After many years, these looms have been from grasping to rapier looms, and then to water jets to jets. They often interweave yarns and yarns in longitudinal and horizontal directions in regular order, so as to finish weaving process.
In air-jet looms, the air jet is effectively ejected through the shed, and the weft yarn is fed to the other side, that is, the air jet is used to drive the weft yarn at the speed of up to 600ppm. In order to make the fabric the latest type of loom in the market, it is necessary to use uniform weft in air jet loom accessories. Although heavier yarns are suitable for jet looms, lighter yarns are difficult to control through the shuttles. It is also noticed that two roving can not be transmitted through a jet on the loom. In spite of these limitations, jet looms can produce a variety of fabrics.
The "magnetic levitation system" attached to the jet loom can create miracles and overcome restrictions.
The magnetic levitation system can be called the magnetic levitation system weft insertion. It shows that the magnetic levitation weft insertion is a guided transport system guided by magnet, which uses magnetic levitation to guide and propelling weft and jet. In fact, the maglev insertion refers to the use of magnetic force to generate lift and thrust along the direction of the depression with the magnets carrying the weft yarn. The power needed to alleviate is not a big proportion in the total energy consumption. As with any other high-speed insertion mode, most of the power used will need to overcome the air resistance (resistance).